[Trisquel-devel] trisquel ARM install tarball

[David Lecompte]

I made an SD card for the OLinuxino-Lime2:

$ cd ~/Trisquel/installer-armhf/20210731+deb11u8+11/images/netboot/SD-
card-images/
$ zcat firmware.A20-OLinuXino-Lime2.img.gz partition.img.gz >
complete.img
$ sudo dd if=complete.img of=/dev/sdc

I attach a photo at boot (if fails) of what the connected HDMI screen
shows.

At some point, there is:

This installer medium does not contain a suitable device-tree file for
this system (sun7i-a20-olinuxino-lime2.dtb). Aborting boot process.

I guess this is enough for boot not to work.

I looked into the debian installer for debian, the missing file in the
complete image generated in the above described way, but it is not
there in the complete image generated for trisquel. So I guess
something needs to be fixed in the images.

I don't know whether the previous error "Unable to read "uboot.env"
from mmmc0:1" is a problem that needs fixing or not.

Note: I have a sun7i-a20-olinuxino-lime2.dtb that I generated for
bullseye (with modification for gigabit ethernet on my board revision),
but it isn't from the same kernel so maybe I cannot copy that directly?

David.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: screen-cap.jpg
Type: image/jpeg
Size: 312423 bytes
Desc: not available
URL: <http://listas.trisquel.info/pipermail/trisquel-devel/attachments/20230708/26f2cab7/attachment-0001.jpg>