[Trisquel-devel] Trying to boot Trisquel on rockpro64

[David Lecompte]

I followed the advice at
https://wiki.debian.org/FreedomBox/Hardware/RockPro64 to flash U-boot to the
SPI flash.

If I try booting the debian installer from 
https://d-i.debian.org/daily-images/arm64/daily/netboot/SD-card-images/, (I
dot the concatenation as in the README) it works (I continued to install
Debian on an SSB connected via USB, afterwards, it boots).

In https://builds.trisquel.org/debian-installer-images/debian-installer-images_20210731+deb11u12+11.0trisquel18_arm64.tar.gz,
I did the same using similar files found in installer-
arm64/20210731+deb11u12+11/images/netboot/SD-card-images, after "Starting
kernel ...", nothing happens any more.

I attach the boot logs obtained via serial console. I noticed differences in
addresses at the end, I don't know whether this reflects a problem or it is
just something normal.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: logs.tar.gz
Type: application/x-compressed-tar
Size: 10728 bytes
Desc: not available
URL: <http://listas.trisquel.info/pipermail/trisquel-devel/attachments/20250131/7556b05d/attachment.bin>